Caterpillar WHEEL LOADERS 980K - catalog of spare parts

Specifications

engine

The number of cylinders - 6

Engine make - 2236

Engine Model - C15 ACERT

Net power - 369 hp

Gross Power - 355 HP

Measured Power @ - 1800rpm

Displacement - 762.8cu in

Max. Torque - 1191

Boredom - 5.1 inches

Stroke - 6.2 inches

Net Power - ISO 9249 - 369 HP

Engine Model - Cat? C13 ACERT?

Maximum net power - 1600 rpm - ISO 9249 - Metric - 373 hp

Maximum net power - 1600 rpm - SAE J1349 - Metric - 373 hp

Maximum net power - 1600 rpm - SAE J1349 - 369 hp

Maximum net power - 1600 rpm - ISO 9249 - 369 hp

Peak Torque - 1300 rpm - SAE J1995 - 1541 lb-ft

Maximum net power - 1800 rpm - EEC 80/1269 - 369 hp

Maximum apparent power - 1600 rpm - SAE J1995 - 406 hp

Peak Net Torque - 1,200 rpm - SAE J1349 - 1,445 lb-ft

Maximum net power - 1800 rpm - EEC 80/1269 - metric - 373 hp

Maximum apparent power - 1600 rpm - SAE J1995 - Metric - 412 hp

Power - ISO 14396 - 402 HP

Maximum apparent power - ISO 14396 - 402 hp

Maximum apparent power - ISO 14396 (metric) - 408 hp

Operational

Working Weight - 66489.3 lbs

Fuel capacity - 127gal

Hydraulic system capacity - 66 gal

Engine oil volume - 10 gal

Cooling system capacity - 22 gal

Transmission fluid capacity - 16 gal

Front Axle / Differential Fluid Volume 23 Gallons

The fluid capacity of the rear axle / differential - 23gal

Static Tipping Weight - 50201 lbs.

Turn radius - 26.1 feet in

Operating voltage - 24 V

Generator current strength - 80 amperes

Rear Axle Fluctuation - 26 degrees

Tire size - 29.5-25

Transmission

Transmission Type - Powershift

The number of forward gears - 4

Number of reverse gears - 4

Top Speed ​​- Forward - 22.6 Mph

Max. Speed ​​- Reverse - 25.8 mph

Standard Torque Converter - Forward 1 - 4.2 mph

Standard Torque Converter - Forward 2 - 7.5 mph

Standard Torque Converter - Forward 3 - 13.4 mph

Standard Torque Converter - Forward 4 - 23.5 mph

Standard Torque Converter - Reverse 1 - 4.8 mph

Standard Torque Converter - Reverse 2 - 8.6 mph

Standard Torque Converter - Reverse 3 - 15.2 mph

Standard Torque Converter - Reverse 4 - 26.6 mph

Lockup Torque Converter - Forward 1 - 4.3 mph

Lockup Torque Converter - Forward 2 - 8.1 mph

Lockup Torque Converter - Forward 3 - 14.3 mph

Lockup Torque Converter - Forward 4 - 25.3 mph

Lock Torque Converter - Reverse 1 - 4.9 mph

Lockup Torque Converter - Reverse 2 - 9.2mph

Lock Torque Converter - Reverse 3 - 16.2 mph

Lock Torque Converter - Reverse 4 - 24.9 mph

Weights

Operating Weight - 68,862 lbs.

Tires

Note (1) - Caterpillar recommends consulting your tire supplier to evaluate all conditions before choosing a tire model.

Note (2) - Other special tires are available on request.

Choices (1) - 29.5R25 VMT BS L3 Radial; 29,5R25 XHA2 MX L3 Radial; 29.5R25 VSDL BS L5 Radial

Selection (2) - 29.5R25 XLDD2 MX L5 Radial; 29.5R25 X MINE D2 MX L5 Radial

Note (3) - In some cases, the truck’s production capacity may exceed the tire capacity in tons / hour (t / mph).

Buckets

Bucket volume - from 4.00 to 12.20 m3 (from 5.25 to 16.00 m3)

Hydraulic system

Pump Type - Gear

Safety Valve Installation - 3000

Pump productivity - 123 gal / min

Lifting Time - 6sec

Dump time - 2.1 sec.

Shorter time - 3.4 s

Hydraulic cycle time - total - 11.4 s

Aggregate System - Maximum Operating Pressure - 4496 psi

Hydraulic cycle time - lowering, emptying, lowering - 3.3 s

Unit system - maximum pump capacity at 2200 rpm - 121.5 gal / min

Steering System - Pump Type - Piston

Hydraulic cycle time - rise from transport position - 6.4 s

Hydraulic cycle time - discharge, at maximum lift - 1.7 s

Implement System - 3rd Function Optional Function: Maximum Flow Rate - 79.3 gallons / min

Implement System - Optional Feature 3rd Maximum Pressure - 3,000 psi

Bucket

Breakout Power - 61425 pounds

Dump clearance at maximum lift - 10.9 feet per

Bucket Width - 11.6 Feet in

Bucket Capacity - Bulked - 5.5yd3

Bucket Capacity - Breakdown - 4.8yd3

Axes

Rear Swing - 13 degrees

The maximum rise and fall of one wheel - 21.6 inches

the brakes

Brakes - meet OSHA, SAE J1473 OCT90 and ISO 3450-1985 standards

Dimensions

Length with bucket on the ground - 31.1 feet in

Tire Width - 10.6 Feet in

Height to Cab Top - 12.4 Feet in

Ground clearance - 1.5 feet in

Wheelbase - 12.2 feet in

Articulated Finger - Maximum Height - 14.8 Feet

Reach at Max Lift and Dump - 5.1 feet in

Operational characteristics

Breakout Force - 53,548 pounds

Static Tipping Load - 37 Degree Full Turn - ISO 14397-1 * - 42,464 lbs.

Static Tipping Load - 37 Degree Full Turn - Rigid Tires ** - 45,148 lbs

Service replenishment options

Cooling system - 16.6gal

Carter - 9.8 gal

Hydraulic Tank - 44.9 Gallons

Fuel tank - standard - 118.1 gal

Transmission - 17.4gal

Differential - Last gear - Front - 22.2gal

Differential - Last gear - Rear - 22.2gal